Catalytic Scent Lampe Fuel

1. 1

   IMPORTANT: You must use a 90% strength isopropyl, or rubbing, alcohol. The 70% isopropyl alcohol contains too much water in the solution, and will not burn. You can find the 90% strength at drugstores on the same shelf next to the 70% solution.

2. 2

   ALSO: Use the best undiluted quality oil as you can -- to check for purity, place one drop on a sheet of clean paper. The drop should completey evaporate if the essential oil is pure. If it leaves a greasy, oily spot, select another oil.

3. 3

   CONVERSION NOTE: I measure my essential oils in ML, not OZ or other units. 1/2 teaspoon equals approximately 2ML.

4. 4

   Open a 12oz bottle of 90% isopropyl alcohol.

5. 5

   Add the essential oil.

6. 6

   Screw the cap back on. Shake to mix, and you're done!

* Per serving · 4 servings · Values may vary.

No additional tips available.