-
1
Rinse the poultry pieces in a colander under cold running water and drain them well.
-
2
Place them in an 8- to 10-quart stockpot.
-
3
Pour in the cold water and bring to a boil over high heat.
-
4
Boil for a minute or two and you will see foam rising to the surface.
-
5
Skim off and discard the foam, lower the heat to a strong simmer, and cook 1 hour, occasionally skimming the foam and fat from the surface.
-
6
Add the remaining ingredients except the salt to the pot.
-
7
Bring to a boil, then adjust the heat to simmering.
-
8
Cook, partially covered, 2 to 3 hours, skimming the foam and fat from the surface occasionally.
-
9
Strain the broth through a very fine sieve, or a colander lined with a double thickness of cheesecloth or a clean kitchen towel.
-
10
Season lightly with salt.
-
11
To use the stock right away, wait a minute or two and spoon off the fat that rises to the surface.
-
12
The last little traces of fat can be swept off the surface with a folded piece of paper towel.
-
13
It is much easier, however, to remove the fat from chilled stockthe fat will rise to the top and solidify, where it can be easily removed.
