Bird Houses

1. 1

   Tie a bow with the raffia.

2. 2

   Assemble corks by size the best you can. So each section is about the same size.

3. 3

   When gluing adjust corks while glue is hot to even out.

4. 4

   This is glued in 6 sections then put together.

5. 5

   The base is 4 corks glued (2 side x side then glued end to end.

6. 6

   Attached to the right and left of the base will be 1 row of 4 corks glued together (side x side).

7. 7

   The peak is 2 corks glued end to end.

8. 8

   The 2 roof tops are 8 corks each. Two rows of four corks glued side X side, then glue the 2 rows together.

9. 9

   Assemble start at the base attach the right side and the left side. Eye them to make them come out on an angle.

10. 10

    Then go to the top half glue the peak to the roof sides. Take note in the pictures how they meet.

11. 11

    You can adjust while glue is warm.

12. 12

    Randomly place hot glue on open spaces and top with moss or herbs. Place a nest inside and place birds in the nest. Adhere the bow on top with hot glue.

13. 13

    Be careful not to burn yourself. I made 10 and burnt myself 3 times.

No additional tips available.