Dry Stout (For Intermediate Homebrewers) Recipe

Line the 7.5 gallon kettle with the mesh bag, fill with 2.5 gallons of tap water and bring to 161u00b0F. Remove from heat.

Mash-in by slowly adding all 7.65 pounds of grain into the water and inside the bag. Stir for 2 minutes to prevent balls of grain from clumping together, creating a consistent mash. The temperature should equalize to about 150u00b0F.

Cover the mash, only uncovering to briefly stir every 20 minutes. Heat 3 more gallons of water to 185u00b0F.

After 60 minutes, mash-out by carefully pouring the 185u00b0F water into the mash, stirring to equalize temperature to about 170u00b0F.

Slowly raise the grain bag out of the liquid, allowing the wort to drain from the grain. Hold the grain bag above the kettle for 5 to 10 minutes as the wort drains. Top the wort off with water to 6 gallons.

Bring wort to a vigorous boil. When the boil begins, add 1.25 ounce Kent Goldings hops in a mesh bag.

After total of 60 minutes of boil, remove from heat.

After wort cools below 180u00b0F everything that touches it should be sanitary, and exposure to open air should be limited as much as possible.

Cool wort by placing pot in ice bath or by using a wort chiller until it is below 70u00b0F. Transfer to sanitized fermentor (either a carboy or a fermentation bucket).

Use a sanitized auto-siphon racking cane to remove enough wort to take a gravity reading with your hydrometer. Make a note of this number, since you will be using it to calculate the actual alcohol content when it's done fermenting. The reading should be around 1.040.

Carefully pour yeast into cooled wort (it should be below 70u00b0F), and agitate vigorously. Cover fermentor with a sanitized stopper and airlock. Ferment in dark place, keeping ambient temperature consistent, preferably between 65 and 68u00b0F.

Bottle after 2 to 3 weeks when fermentation is complete, using